Products Characteristics
The ABT E-trek DM designed for high performance and integrity applications.
Designed for cycling applications:100%DOD 300 cycles(20℃)
High cycling and over-discharging recovery performance
Good charging performance
High products consistency
Low rate of self-discharge:≤3%(20℃)monthly on average
Safety and reliable leakage-proof performance
Easy installation and handling
Operating in wide ambient temperature range:-20℃~50℃
Applications
Battery Construction
Technical Features
INTRODUCTION
The ABT E-trek DM is ranges of block batteries for all traction applications, from cleaning machines to pallet trucks, industrial electric vehicles etc. as well as some domestic applications like electric bicycle, wheelchairs, golf carts, electric vehicle, etc.
DM is AGM VRLA batteries.
Charge
Both ranges can be recharged with battery chargers. Our chargers are equipped with microprocessors and ensure a reliable full recharge for any degree of discharge of the battery (max 80%).
These chargers have an electronically regulated characteristic charging curve. Charging process is automatically controlled and terminated. All chargers are protected against overload and short circuit.
Operation
To achieve optimal operating life avoid deep discharges. Never leave the battery in a discharged state. Valve regulated batteries with absorbed electrolyte (AGM)are sealed for life and need no watering.
Installation
Battery monoblocs should be installed in accordance with the instructions from vehicles/trucks manufacturers (respect of polarity for the connection, and mechanically robust installation). While operating on battery connections avoid short circuits.
Storage
If batteries have to be stored out of service for a long time, they must be kept fully charged in a dry, clean and frost free zone. A monthly refreshing charge avoids any harmful deep discharge and damage to the battery.
Maintenance
Keep batteries clean and dry to avoid current leakage. Clean the monoblocs with a damp cotton rag. Never use any organic solution!
Operation and maintenance instructions for each product range should always be observed.
|